Instruction – Wall Grace

Wall Grace is used for finishing walls and ceilings. It combines reliability, ease of application and original aesthetic properties. A great variety of shades and textures helps to realize the most extraordinary ideas in interior design.

The way of preparation and application isn’t complicated and only a plastic trowel is used as equipment. The durability of the material provides its long lifetime. Wall Grace is a great decision for those who wants to refresh the interior in a short time.

IMPORTANT NOTE!

If you need several Wall Grace packages, mix all of them with water at once. Partial mixing of the package is forbidden, because sometime you can face shade difference issue.

Use only one kneading to cover the whole surface of the wall or ceiling. Don’t use two or more different portions of mixture for the same surface.

Prepared mixture should be used within 48 hours of soaking.

Note the importance of keeping right temperature and humidity throughout the period from the beginning of making up the mixture till the end of application.

Keep Wall Grace packages in a dry place with a temperature from 5 to 40 degrees Celsius, away from sunlight. If these conditions are met and the package is sealed, expiration date is not limited.

APPLICATION OF MATERIAL

Combine Wall Grace With Water
Considering the surface area value, calculate the amount of total mixture needed. It matters because surface of one wall (or ceiling surface) should be completely covered with material from only one kneading. Pour the water into a plastic container and add the contents of the package. The required volume of water is indicated on the package.
Add Decorative Elements
If desired, add glitters and/or other decorative additives, evenly distributing them within the mixture. All types of glitters and additives are purchased separately.
Mix The Material By Your Hand or Using The Drill
Mix the material thoroughly by hand to prevent the formation of clots of glue. Some materials need to be stirred using a drill with a mixer nozzle. Read the instructions on the package to find out if using of drill is required for the particular material. Put the soaked mixture in a plastic bag and leave it for 12 hours.
Apply The Wall Grace Mixture
In small portions spread the prepared material evenly over the entire surface using the plastic trowel. Wait 1-2 hours after application of the mixture and flatten the surface using the trowel. Wet the trowel in the water before use it.